We embroider and we print. Embroidery costs more, takes longer and puts real limits on the artwork: here is what really changes between the two, to help you choose.
Two ways to put a design on a garment
Printing lays material on top of the fabric. Depending on the method — screen printing, heat transfer, direct-to-garment — it is a layer of ink, plastisol or film that sticks to the fibers. The design can be photographic, full of gradients, and cover the whole garment. It is fast and cheap.
Embroidery adds nothing on top: it goes through the fabric. A machine drives the thread in, stitch by stitch, until the design takes shape. The artwork is not sitting on the garment, it is part of it.
You can't see the difference on day one. It decides everything that comes after.
What it changes when you wear it
| Embroidery | ||
|---|---|---|
| In the wash | Ink fades, film can crack and then peel | Thread doesn't fade and doesn't peel |
| To the touch | A smooth, sometimes plasticky surface | Raised texture — you can feel the design under your finger |
| Possible designs | Photos, gradients, solid areas across the whole garment | Lines, solid shapes, clear forms — no photos |
| End of life | The design often dies before the garment | The design ages along with the garment |
| Cost | Low | Significantly higher |
The last row is the only one that works against us, and we own it. A garment whose design flakes off after ten washes is a garment you stop wearing. That is a cost too — it just gets paid later, and by someone else.
A design made for thread is not a design made for print
You can't take a file meant for printing and send it as is to an embroidery machine. Every design is reworked: fewer colors, thicker lines, and details removed when they wouldn't survive the move to thread.
The rule fits in one sentence: the design has to stay readable at about 1.5 inches (4 cm) wide. That is the width of a chest embroidery. A drawing that works on a big screen doesn't always hold up at that size, and then it has to be redrawn rather than shrunk.
That is why our embroidered designs look like what they are — patches, coats of arms, emblems. Those shapes were born from the limits of thread, long before us.
It is also why embroidery can't reproduce photographs or gradients: that isn't something missing, it is a limit of the technique, and we would rather say so.
Caring for embroidery
Embroidery needs fewer precautions than a print, not more. Three habits are enough:
- Wash inside out, at 30 °C (86 °F). This mostly protects the fabric; the thread itself can take a lot.
- Skip the tumble dryer. Heat shrinks cotton, and fabric that shrinks pulls on the embroidery.
- Iron inside out, or around the design. An iron on the thread flattens the raised texture.
None of these rules is specific to embroidery: they are the rules for cotton. Well-made embroidery on a well-washed garment has no reason to move.